United Electric Ue Pressure Transmitter Ue Tx200 -A19s1t Ue Tx200 -A20s1t
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Transport Package:||Standard Package|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: UE TX200 -A19S1T UE TX200 -A20S1T
- Structure Type: Strain Gauge Pressure Transmitter
- Accuracy Grade: 1.0G
- IP Rating: IP67
- Customized: Customized
- Type: Differential Pressure Transmitter
- Measuring Medium: Gas
- Pressure range: 0.001MPa～35MPa
- Certification: CE
- Trademark: UE
united electric tx200 general introduction:
The TX200™ transmitters utilize a bonded foil strain gage bridge sensor to detect and continuously monitor pressure in a system. The strain gage is a resistive element whose resistance changes with the amount of strain (pressure) placed upon it. Flexing of the diaphragm causes the resistance change and electronically communicates this via a 4 to 20 mA output signal or optional 1-5 VDC output signal to a digital meter or gauge, a PLC (programmable logic controller) or other device. Enclosure type B is "fixed range" while enclosure type A is "field adjustable" with a 5:1 turndown ratio.
A feature of the field adjustable transmitter (TX200A) is its span ratio of 5:1. The span can be field adjusted using the 4 control buttons located on the transmitter (see diagram 2) and without removing it from service or the neccesity of a precise pressure source. Using the following formula and procedure below, the transmitter is easily recalibrated to the desired pressure range.
Formula: Ical = (Cal# x 16/Pcal) + 4
Formula Key: Ical is the output current that the user will set, with the shunt cal on, in order to achieve the desired full scale pressure (Pcal). Cal# is the amount of pressure simulated by turning the shunt cal on. The value is engraved on the TX200 housing and written on the Certificate of Calibration. Pcal is the desired (user defined) full-scale pressure recalibration point.
1) Determine transmitter pressure range for application and apply the above formula to get Ical.
Example: End-user has a UE transmitter P/N TX200A10S1(0 to 2500 psig /0 to 172,4 bar range). For a particular application, a 0-1500 psig (0 to 103,4 bar) range is desired using this transmitter - this is the Pcal. The Cal# engraved on the transmitter housing is 424 psi (29,2 bar). Using the formula above, Ical = (424 x 16/1500) +4, the Ical calculated is 8.52. When all steps below are completed, the transmitter in this example would be spanned so that the 4 mA output signal = 0 psig and the 20 mA output signal = 1500 psig (103,4 bar).
2) Connect the transmitter to a 24 volt-nominal voltage source through a 100 ohm termination resistor. Connect a 4-1/2 digit, digital voltmeter across the terminating resistor. The output across the resistor will be 100 mVolts/mA.
3) Zero the transmitter.
4) Turn the Cal switch to the on position.
5) Adjust the Span and Fine Span control buttons until the Ical value appears.
6) Turn the Cal switch to the off position.
The transmitter should now be spanned to the desired pressure range. To verify the new pressure range, check that the transmitter output is 4mA at zero pressure. Next, apply full-scale pressure to the transmitter and check that the transmitter output is 20 mA at Pcal.
United Electric's TX200 is a compact, rugged pressure transmitter designed for process control applications, and is particularly suited for petrochemical and upstream oil and gas applications.
The TX200 features an all-welded 316 stainless steel hermetically sealed enclosure providing airtight and watertight protection in the harshest environments. The light weight cylindrical design makes it easy to mount directly in the process. The TX200 can be submersed in water to 100 feet when used with the appropriate water-tight conduit connection.
Pressure Ranges: 0-15 PSI to 0-2500 PSI
All welded 316 stainless steel wetted materials
Type 4X/IP66 hermetically sealed stainless steel enclosure
cULus and ATEX certified Class I, Div 1, Zone 1 for harsh environment use
Choice of 4-20 mA, 1-5 VDC, 0-10 VDC, or HART (TX200H) outputs
TX200A field-adjustable model offers access to zero/span transmitter up to 5:1 turndown
TX200B fixed range transmitter for use where process pressure is consistent within range and access to transmitter is limited or not required
TX200H is a HART® smart transmitter with a flexible 10:1 turndown ratio
|UE TX200 -A03S1T||UE TX200 -A04S1T||UE TX200 -A05S1T||UE TX200 -A06S1T||UE TX200 -A07S1T||UE TX200 -A08S1T||UE TX200 -A09S1T||UE TX200 -A10S1T|
|UE TX200 -A11S1T||UE TX200 -A12S1T||UE TX200 -A13S1T||UE TX200 -A14S1T||UE TX200 -A15S1T||UE TX200 -A16S1T||UE TX200 -A17S1T||UE TX200 -A18S1T|
|UE TX200 -A19S1T||UE TX200 -A20S1T|
|UE TX200 -B03S1T||UE TX200 -B04S1T||UE TX200 -B05S1T||UE TX200 -B06S1T||UE TX200 -B07S1T||UE TX200 -B08S1T||UE TX200 -B09S1T||UE TX200 -B10S1T|
|UE TX200 -B11S1T||UE TX200 -B12S1T||UE TX200 -B13S1T||UE TX200 -B14S1T||UE TX200 -B15S1T||UE TX200 -B16S1T||UE TX200 -B17S1T||UE TX200 -B18S1T|
|UE TX200 -B19S1T||UE TX200 -B20S1T|
|UE TX200 -H03S1T||UE TX200 -H04S1T||UE TX200 -H05S1T||UE TX200 -H06S1T||UE TX200 -H07S1T||UE TX200 -H08S1T||UE TX200 -H09S1T||UE TX200 -H10S1T|
|UE TX200 -H11S1T||UE TX200 -H12S1T||UE TX200 -H13S1T||UE TX200 -H14S1T||UE TX200 -H15S1T||UE TX200 -H16S1T||UE TX200 -H17S1T||UE TX200 -H18S1T|
|UE TX200 -H19S1T||UE TX200 -H20S1T|
|UE TX200 -15929+03S1T||UE TX200 -15929+04S1T||UE TX200 -15929+05S1T||UE TX200 -15929+06S1T||UE TX200 -15929+07S1T||UE TX200 -15929+08S1T||UE TX200 -15929+09S1T||UE TX200 -15929+10S1T|
|UE TX200 -15929+11S1T||UE TX200 -15929+12S1T||UE TX200 -15929+13S1T||UE TX200 -15929+14S1T||UE TX200 -15929+15S1T||UE TX200 -15929+16S1T||UE TX200 -15929+17S1T||UE TX200 -15929+18S1T|
|UE TX200 -15929+19S1T||UE TX200 -15929+20S1T|
1. Your inquiry related to our products or prices will be replied within 24hours.
2. Competitive prices based on same quality.
3. All our products have 1-year warranties.
4. Offering the support to solve the problem in the application or selling period.
5. Guarantee samples quality same as mass production quality
6. We can manufacturer products as your customized.
7.We have a professional technical team .
8.We can supply of spare parts To ensure that users in a timely manner to need.
Price and package:
1. Price : FOB Wuhan
2. Payment: LC ,T/T in advance or PayPal,Western Union.
3.Packing : standard export packing , including instructions and certificate
4.. OEM avaliable
6. Shipment: Express (FedEx, DHL, UPS & TNT) or forwarder
7.Convenient and Cheaper shipping cost price
We are a leading company with many years' experience in CCS, YOKOGAWA, UE ,
SOR export business. Our products which enjoy popularity in the world markets.
|We specialize in offering following products:|
|1. UE switch, SOR switch,CCS switch,WIKA products,DWYER products|
|2. Level Transmitter|
|3. Temperature Instrument(transmitter,sensor,switch,gauge)|
|4. Pressure Instrument(transmittter,sensor,switch,gauge)|